276°
Posted 20 hours ago

BONTEC Ergonomic Dual Monitor Stand for 13-27 inch LCD LED PC Screens for Desks, Height Adjustable Arm Bracket Tilt 90° Swivel 180° Rotate 360°, VESA 75/100

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

The removable VESA plates of 100 X 100mm and 75 X 75mm let you enjoy an easy installation process. The removal of the stand has also become easier than it was before due to its Integrated Cable Management. Now the connection wires of the monitors will not get tangled and wont occupy more space on your workstation.Thus the detaching, pulling ,and height can be adjusted greatly without any type of inconveniences. There is another role played by the pneumatic springs i.e. they promote Counterbalancing Technology to keep the weight of the stand even throughout the working hours, after installation and positioning of the LED monitors.

Now, as we move ahead in this article, here are some of the most important directives that must be taken care of at all costs. You must consider the following factors before buying your dual monitor arms. If you are looking to set up a great workstation that allows you more space and comfortable computer viewing angles, you must definitely get a monitor arm(s), depending upon your requirement. A monitor arm helps you place your monitor in a sturdy manner where you can also easily rotate and adjust it. Monitor arms help you save space on your work desks and also improve the overall workstation ergonomics. If you can get your hands on an appropriate monitor arm, it can help you easily adjust your monitor as per your viewing discretion and the angles that are the most comfortable for you.First, let’s talk weight. The Ergotron HX is rated to hold monitors that weigh up to 42 pounds and screen sizes up to 49 inches. That’s an extraordinarily high weight limit—I haven’t reviewed a single monitor in 2023 that exceeds it. I attached both a 32-inch widescreen and 38-inch ultrawide monitor, which weighed roughly 15 and 20 pounds, respectively, and the HX easily handled both. Matthew S. Smith is a freelance technology journalist with 15 years of experience reviewing consumer electronics. In addition to PCWorld, his work can be found on Wired, Ars Technica, Digital Trends, Reviewed, IGN, and Lifewire. Matthew also covers AI and the metaverse for IEEE Spectrum and runs Computer Gaming Yesterday, a YouTube channel devoted to PC gaming history. Monitor size limits should be respected as well. It might be possible to attach a 40-inch monitor to an arm meant for a 32-inch monitor. The 40-inch monitor may even come within the arm’s weight limit. A larger monitor will distribute weight differently, however, which could cause an arm’s tension mechanism to fail. How we test monitor arms Feeling strained while working in front of the computers for a long time? It is quite obvious and you cannot put off the task because of tight deadlines. VARIDESK – Monitor Arm – Full-Motion Spring Dual – Monitor Arm can be the ideal solution to this problem. It comes with dual arm for your monitors and let you control the task on two computers simultaneously.

It is one of the best dual monitor stands that can hold small as well as large LCDs effectively because of its arms weight of 19.8lbs each. The mounting cables are compatible with VESA plate of 100 X 100 mm and 75 X 75 mm holes so that you can easily mount any branded monitors.In case if you find that your monitor is not compatible with this VESA plate, then you will have to buy an external VESA adapter to use this monitor stand. This plate has a crucial role to play for complimenting the tilting and screen rotational ability. The balancing between the weights of the stand with respect to monitors is remarkable just because of the Gas Spring System. There are many dual monitor arm stands which provide ergonomic specification but no one can ever beat Dual Monitor Stand – FEZIBO Adjustable Full Motion Monitor Mount. The arms are crafted in such a way so that they can help the User maintain the minimum elevation height and distance from their eyes. The sturdiness of the body gives a sleek and stylish look to your work desk. Why not use AVLT-Power Dual Monitor Mount for your commercial purposes when it comes with highly articulating specification? With this product, you can customize the holding ability and the product will hold three monitors for you at the same time. If you’ve got extra hefty monitors to support, your best option is something like this 3M dual-swivel monitor arm. You may know 3M for its heavy-duty adhesives, but the company makes lots of other sturdy, reliable desk accessories. This arm lives up to the 3M name, holding monitors up to 30 pounds.Nearly all monitors, and nearly all monitor arms, use the VESA mounting standard. The 100x100mm bolt pattern is by far the most common, though 75x75mm is sometimes used as an alternative. All the monitor arms we recommend support both bolt patterns. The two outer arms can tilt 35 degrees in both directions, swivel 90 degrees in each direction, and rotate 180 degrees in each direction. Meanwhile, the center arm can lift up close to 17 inches in height.

The SMMA1045 is constructed from both mild steel and aluminium and is integrated with innovative gas-spring counterbalance technology. Our most up to date design it has a clean design aesthetic and...

None of the monitor arms tested were difficult to install, but the difference between budget and premium models was clear. Budget models require more screws to install, and the default tension of the arm’s adjustment mechanism is less likely to be suitable out-of-the-box. It provides a good range of adjustment, with 13.2 inches of height and 90 degrees of tilt, swivel, and rotation. The arm’s height and tilt adjustment are comparable to others on this list, but it can’t swivel in a full circle, which may prove annoying if you frequently move a monitor arm to share your screen with colleagues. The SMMA1046 is constructed from both mild steel and aluminium and is integrated with innovative gas-spring counterbalance technology. Our most up to date design it has a clean design aesthetic and... The SMMA1024 is the dual arm version of the SMMA1023. It means that this arm can be used to adjust the distance both monitors are away from you. This is great for maintaining... The SMMA1035 is constructed from both mild steel and is integrated with innovative counterbalance technology. Its new design VESA plate makes monitor installation much easier. It efficiently frees up space...

Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. A quality monitor arm is one of the best upgrades you can make to your home office setup. Not only do monitor arms provide you with a lot more options to move and position your display/s around your desk, but they also free up space on your desk surface, leaving it open for other use. Plus, they help your setup look sharp, too. Investing in dual monitor arms means that you will have to consider all the factors that will help you decide how you want to place your two monitors for achieving the most comfortable viewing position. Based on the size of your monitor, the measurement of your work desk, and your level of comfort, you can easily determine which dual monitor arm to buy. Many people use their laptops when they work, but your desk height probably means your laptop is far below eye level, which leads to hunching. This stand comes with an arm for your monitor along with an attached tray for your laptop, so you can use both screens in conjunction.You can make your office space smart and clean by installing the VIVO Dual Arm Monitor Desk Mount. The greatest compatibility of the two monitors in a single desk makes your office space highly professional. Some technologies have been equipped with it so that you can adjust it seamlessly in any direction according to your preferences to work. Monitor size is one exception: While the standard LX is rated for monitors up to 34 inches, the Side-by-Side’s arm is only rated for monitors up to 27 inches. The monitor arms aren’t long enough to fit two 32-inch or 34-inch monitors side-by-side. Vertical arrangements are also supported, though only if one of the two monitors is small (less than 23 inches diagonal). One of the highest quality options you can buy, this monitor arm from Ergotron is built to last. Alongside a sturdy arm that holds monitors up to 25 pounds, this also comes with a generous 10-year warranty. Fixed articulating monitor arms. These cannot easily be height adjusted when in use but depending on the set-up the monitor can be swung towards or away from the user. The monitor can also be mounted portrait and landscape. The EleTab Dual Monitor Mount Stand is incredible to install at such a workstation where the workspace is limited. It not only provides ample space in the workstation but also promotes the health of the individual.In contrast to other dual monitor stands, its adjustable height allows it to be lowered to 5.3 inches and higher up to 16.3 inches. Due to the swivel angle of -90 to +90 degree one can install the monitor in various positioning ways. Apart from VESA compatibility, the full body of this stand is made of aluminum. The full motion specification allows the monitor to rotate at any direction for enhancing the readability and other purposes.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment