Azpects Jointing paving Grout - MUSHROOM - 12.5kg Jointing Compound

Product Information

Freezing weather will increase the set time and will cause the process to virtually stop, it can take many days for the joints to set fully hard. However EASYJoint will eventually set and the weather conditions will not have impaired its integrity in any way. If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. Freezing conditions are not always problematic for EASYJoint, however the volume of water used during the application process can potentially freeze. In this instance the particles within the grout mix won’t settle into the joints evenly due to the presence of ice and potentially lead to longer term problems.

The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled without the need for kneeling and compressing the material by hand that will last for years. A strong joint that will resist the elements and stand the test of time - better than traditional jointing methods.

Dimensions

Please Note: This information is for guidance only, the above table is to be used as an estimate of the amount of EASYJoint required, we always recommend purchasing an additional 1-2 tubs to ensure that you have enough – it will also keep due to the unlimited shelf life. Easyjoint can be used in wet or dry conditions and is sold in a 12.5kg tub which will cover an average of 7m² depending on slab size and joint width.

Utilise the same method when working with porcelain paving tiles as with working with stone or concrete. The base on which the porcelain is laid must be able to drain. If the base is non-permeable then EASYJoint Pro or EASYGrout should be used. Sponge Machines & Ancillaries We supply a range of indoor & outdoor sponge machines from Refina & Berta which are suitable for cleaning epoxy & cement grouts such as UltraScape Flowpoint from quarry tiles, external paving slabs, natural stone and granite setts. Our range of sponge machines protects the joints between paving slabs by avoiding washing away the cement, whilst the machine removes the need for individuals to wash away grout on their hands and knees. Bedding Mortars We supply a range of fast set, cement & resin based bedding mortars which are ideal for installing manhole covers, utility access covers, frames, highways ironwork and the bonding of granite, sandstone & porphyry setts, paving slabs, flags and bedding kerbs. Our range of high strength, bedding mortars mean roads, footpaths & highways can be reopened to traffic in as little as 40 minutes, meaning less disruption for the general public. Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabsLess water is needed when applying EASYJoint to porcelain paving, as there is little risk of residue staining. You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. When applying to porcelain, to ensure an effective joint, the operator MUST strike the joint off, to compact the grout fully. Compaction forces out air and water which helps the joint harden faster. Continuously Wash the Paving With Lots of Water. The person with the hose should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of them so that the paving is always wet. This is particularly important in warm/hot weather conditions. In dry conditions and warm temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure hard within a few days. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings.