Marflow Shower PL8 - Shower Fixing Plate (PL8) 2 Year Guarantee PL8

Product Information

Yes, I'll be removing the plasterboard so these both look perfect, but I think the Shower PL8 is ideal for me.

Bathroom Showers | Bath Showers | Toolstation Showers | Bathroom Showers | Bath Showers | Toolstation

Newtonsoft.Json.JsonReaderException: Error reading JArray from JsonReader. Path '', line 0, position 0. Our product development started with the Shower PL8, a pioneering shower fixing plate which is designed, manufactured and patented for First Fix Installations. Covered by a UK patent, the Shower PL8 is the best solution for achieving perfect Pipe work and a firmly fixed shower. This or similar: http://www.screwfix.com/p/h-c-contemporary-bar-valve-fixing-kit-chrome-effect/76919 Once fitted the bar valve is extremely secure (can withstand a direct pull force of 130kg with no defects). I'm telling you, the shower plates are the best on the market. The Bristan type that Hotdog mentions are identical but don't have the mounting plate to space the pipes apart.The Marflow Shower PL8 - a pioneering shower fixing plate designed, manufactured and patented for "first fix" installations. Covered by a worldwide patent, the Shower PL8 is the best solution for achieving perfect pipework and a firmly fixed shower. Install Ø15mm copper hot and cold feed pipes ensuring they will protrude approximately 60mm from the finished wall surface. Design: Innovative patented plate design eliminates lateral skew when tightening fixings; Chamfered compression nuts for easy and controlled tightening. This approach means that Marflow can proudly boast that its St James range of traditional products is British designed and manufactured. Any opinions about the best way to fit a shower into a stud wall. I'm not too worried about the cost, I just want to get it right 1st time. Any links to pictures/products would be greatly appreciated.

Wall mounted shower valve above taps pipe run | Screwfix Wall mounted shower valve above taps pipe run | Screwfix

hmmm, interesting, the thought never crossed my mind. Still strong enough, expecially if you consider that the copper is tightened onto the plate using compression nuts. Works in the same way as the Bristan Once fitted the bar valve is extremely secure (can withstand a direct pull force of 130kg with no defects) Once fitted the bar shower valve is extremely secure (can withstand a direct pull force of 130kg with no defects)The steel plate is fixed into the wall cavity during the "first fix" stage with a simple clamping device that holds the pipes in position, perfectly square and at the correct distance apart.

Shower PL8 – Shower Fixing Plate – Tilers Choice

As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty. All our products are guaranteed for a minimum of 1 year (radiators vary - see individual product specifications, copper tube 25 years) but many offer longer warranties from the manufacturer, which you may need to register for. I normally chase shower pipes up centrally together then split left and right in a ‘Y’ shape before elbowing out at the right centres. If you followed this method you could simply tee off the hot and cold going left and right at the bath tap height. Install 15mm copper hot and cold feed pipes ensuring they will proturde approximately 60mm from the finished wall surface.As this information is anonymised and aggregated it cannot be used to identify any individual user actions. Using a pipe slice cut the copper pipes to enssure that the shower mixer cover plates meet the finished wall. An accurate and reliable shower fixing plate which is suitable for 15mm pipework. It has easy clamping devices which hold the pipes in place when initially fixing to the wall. Read Less