Marine Blue Silicone Sealant RAL 5002 310ml

Product Information

Tested for use around 1”, 2” and 3” Internal Diameter CPVC pipes through flexible & rigid walls and rigid floors. The product may function on other pipe types, but is not tested for such materials and should not be used as a general fire stopping product.

The product remains inert until exposed to a specific temperature. At this point FS719 will expand and seal the gap left by the dysfunctional CPVC sprinkler pipe. Sprinker system design must include allowances for CPVC thermal expansion at the point of interface with FS719. If this has not been considered, we recommendMoistening the surfaces before and after the application will ensure faster curing and increase the bonding strength.

The sprinkler system must be installed in full accordance with all manufacturers’ recommendations and storage condition guidance. The design of the sprinkler system should consider all local heat sources (close to the sprinkler system), other services (should be prevented from touching the sprinkler system), and building deflection that may have a long term detrimental effect and cause stress fractures on the sprinkler system if not considered in the design. FS719 is used to reinstate the fire performance of compartment lines (walls & floors) which have been breached by CPVC combustible sprinkler systems or other CPVC systems. Ral 5002 Ultra Marine Blue, Ral 5010 Gentian Blue, Ral 5011 Steel Blue, Ral 6005 Moss Green, Ral 6009 Fire Green, Ral 6022 Olive Drab, Ral 7006 Beige Grey. It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism. > Additional Notes Blue 60 PU Foam is a single component, moisture curing, self expanding, ready to use polyurethane foam with propellants which are completely harmless to the ozone layer.

The high gloss finish of this product makes it suitable for both internal and external applications.

Ral 7032 Pebble Grey, Ral 7035 Light Grey, Ral 7039 Quartz Grey, Ral 8003 Clay Brown, Ral 8014 Sepia Brown, Ral 8017 Chocolate Brown, Ral 9001 Pure White.

Ral 6019 Pastel Green, Ral 7006 Beige Grey, Ral 5021 Water Blue, Ral 6006 Grey Olive, Ral 7023 Concrete Grey, Ral 7040 Window Grey, Ral 3000 Flame Red. The Soudal Silirub Ral Colour product is a premium, high-quality, neutral-cure, elastic one-component joint silicone sealant based on oxime silicones. Sealants Online From County Construction Chemicals are proud to hold the largest supplies of mastic joint sealant colours in the UK IMPORTANT– The junction between the door frame and the substrate should be fully filled with Blue 60 fire rated foam. Please note: RAL cards are available for precise colour matching. The colours shown are only a representation and may vary from screen to screen.

Ral 7044 Silk Grey, Ral 1011 Brown Beige, Ral 6003 Olive Green, Ral 7031 Blue Grey, Ral 7043 Traffic Grey B, Ral 7045 Telegrey 1, Ral 7013 Brown Grey. The product provides a weather seal for aluminium glazing systems, curtain walling, and facade panels, as well as good adhesion around internal window and door frames to emulsion surfaces. It can be used with all types of glass, except for self-cleaning glass. Ral 5014 Pidgeon Blue, Ral 6021 Pale Green, Ral 7047 Telegrey 4, Ral 9016 Traffic White, Ral 5017 Traffic Blue, Ral 7002 Olive Grey, Ral 7034 Yellow Grey. A good adhesive for cosmetic trims in sanitary settings such as bathrooms, showers, wet rooms, and kitchens with high humidity levels.The doorset installation should be in accordance with BS476-22 / BS-EN 1634-1 and manufacturer’s guidelines.