X1 X3 X5 TEST FISH KEY FOR SECRET EMERGENCY LIGHT GRID SWITCHES REPLACEMENT (3) by ToolsOnline

Product Information

If everyone goes home at 5pm then perhaps start the test then, or up to 3 hours before. So you know that if there was a problem after the test no one would be in the building and the emergency lights would have a long time to recharge overnight, before people start working again in the morning. But the building is used 24/7 365 days a year! Details of the testing and commissioning carried out on the emergency lighting system, including dates and the results of the tests.

The name of the person or organization responsible for the maintenance and testing of the emergency lighting system. Carry out a full discharge test of the emergency lights to ensure that they remain illuminated for the required duration (usually 1-3 hours). Confirmation that the emergency lighting system has been designed and installed to meet the specific requirements of the building and its occupants. There are different types of emergency lighting; it can be maintained, non-maintained, or combined. Often there are choices with how long they remain on after a power failure. Maintained Emergency Lighting There are three widely used ways to test emergency lighting. To understand them it is necessary to understand first how an emergency light fitting is wired. Note that the remarks that follow apply to self-contained emergency fittings, not to central battery operated emergency fittings.

They can also provide insights on the suitability of systems in respect of applicable British standards and codes. Details of the emergency lighting system, including its location, components, and the type of system installed. Records of all testing and maintenance carried out on the emergency lighting system, including dates, results, and any faults or issues identified. This performs the same function as a key-switch, isolating the fitting from its permanent live supply and thereby simulating a power failure.

The team here at Fire Trade Supplies have assembled a collection of Fish Key Emergency Lighting including F9099 grid keys (PK6), Multi-EL (3 pairs of assorted EL keys), EL key - crabtree style (PK6) as well as many more combinations which can all be found in our store. Our experienced testers conduct over 14,000 emergency lighting tests every year in properties across the UK. They test and inspect all units to ensure they’re functioning correctly. Pre-service auditOur pre-service audit enables us to design a comprehensive testing procedure for every building, allowing our testers to examine your system safely and successfully. This means we can test your emergency lighting systems and report with complete building knowledge, ensuring the service runs as smoothly as possible. Tenant Liaison UK fire regulations stipulate that your emergency lights should be turned on and off monthly to test them and have a full service once a year. The latest British Standard recommends that you have a 3 hour emergency lighting test once a year, during which your main light circuit should be switched off and your emergency lights left on for a 3 hour period to find out of any batteries need replacing. How can Equiptest help me? Test facilities often take the form of a fishtail key inserted into a specific switch, either near the main fuse board or relevant light switches. Additional Combined Services High risk task area lighting provides light for the safety of people involved in potentially dangerous processes. This lighting enables proper shut-down procedures to be followed for the safety of the operator and other occupants of a building. These professionals can advise on the steps that need to be taken to determine the extent and details of the emergency lighting system within a particular building.

The kind of emergency lighting system your building requires depends on the nature of your business. For example, the emergency lighting system is not always required to provide light at the same intensity as the mains (however, it should be bright enough for safe evacuation). By working with the qualified engineers at Voltix Services , system designs and the ideal testing regime are all part of our compliance services .An emergency log book is required to keep a record of all the testing, maintenance, and servicing carried out on an emergency lighting system. It is a legal requirement to keep an emergency log book for each building that has an emergency lighting system installed. A minimum duration of 3 hours should be used for emergency escape lighting if the premises are not evacuated immediately. The 3 hour time frame allows the fire brigade time to work in the event of a fire after all of the building’s occupants have been safely evacuated. How often should my emergency lighting system be tested? If you have a central battery system, then most of the above still applies to you. Drop the incoming power to the battery and do the same walk tests. Make a note of any failures etc. However you need to test the whole system all at once. By testing the whole system at once, you are ensuring that the battery can power all the emergency lights for a full 3 hour duration. If you only tested in zones then the battery would not get a full and proper test. There are different ways to test emergency lighting in the UK, depending on the type of emergency lighting system and the requirements of the relevant regulations and standards. However, the following is a general procedure for testing emergency lighting:

You need emergency lighting in areas that could be considered “dangerous” such as commercial kitchens or plant rooms. If your building has rooms larger than 60 square metres, then emergency lighting is recommended. How long do emergency lights need to stay on? Be very careful when touching anything inside the electrical consumer box, there is a danger of electrocution if something is wrong. If in doubt seek a qualified electrician ** What time of day should I test the emergency lightsDetails of any repairs or replacements carried out on the emergency lighting system, including dates and the nature of the work carried out. Standby lighting enables normal activities within in building to continue in the event of a mains power failure. Standby lighting is not a legal requirement but is a facility that some buildings may need depending on the use and occupancy of the premises. This is purely for emergency use, and so only switches on when there is an emergency and the mains electricity turns off. The battery is charged by the mains and there is a small LED light which should show a green light. This also has to have regular testing to ensure that this still works as it does not switch on usually. This is usually the exit signs. Combined Emergency Lighting Any other relevant information, such as details of training provided to staff on the use of the emergency lighting system.